A AegismedMEDICAL EQUIPMENT
Home/Products/Infusion Pumps

Infusion Pumps
and Syringe Pumps

Precise control of drug and fluid delivery to the millilitre per hour, with alarm systems that help prevent over-infusion.

ICUPediatricsOncologyGeneral Ward
PART 01

Available Models

Choose by the type of therapy — from large-volume fluids through to drugs that must be injected in very small volumes.

AS-IP100
Infusion Pump

An intravenous infusion pump for 100–1000 mL bags or bottles of fluid.

  • Flow rate 1–1200 mL/h
  • Occlusion and air alarms
  • Time-based delivery mode
  • Infusion history log
AS-SP200
Syringe Pump

A syringe pump for 10–60 mL syringes, suited to drugs that must be given in small volumes.

  • Flow rate 0.1–1500 mL/h
  • Accepts several syringe sizes
  • Bolus and TPN modes
  • High accuracy
AS-SP300
Dual Syringe

A dual-channel syringe pump for drugs that must be given simultaneously, or for changing a syringe without interrupting delivery.

  • Two independent channels
  • Automatic syringe changeover
  • Simultaneous dual-channel display
  • Suited to critical care
AS-PC10
PCA Pump

A patient-controlled analgesia pump for post-operative use, with a cumulative dose limit.

  • Configurable maximum cumulative dose
  • Settings locked by staff
  • Every demand logged
  • Alarm at the limit
PART 02

Clinical Applications

Choose according to the tier of the facility and the patient profile it handles; our sales team can advise on the basis of actual use.

Intensive care unit

The AS-IP100 and AS-SP200 are used together for fluid therapy and for drugs that require continuous rate control.

Pediatric ward

Use small syringes at low flow rates, with alarms sensitive to occlusion.

Oncology

The AS-SP200 is used for chemotherapy that requires strict control of rate and volume.

Post-operative analgesia

The AS-PC10 lets patients control delivery within limits set by the physician.

PART 03

Technical Data by Model

Each model has its own table. The values shown are those declared by the manufacturer in the model datasheet, not independent test results — please confirm the values your clinical use depends on in the quotation before ordering.

AS-IP100Infusion Pump · Infusion & Syringe Pump
TypeIntravenous infusion pump
Flow rate0.1 – 1200 mL/h, adjustable in 0.1 mL/h steps
Accuracy±5 % when used per the manual with a suitable administration set
ProtectionAir bubble detection, high/low occlusion pressure, door open
ModesContinuous, Bolus, Time-based
BatteryApproximately 5 hours of continuous use
AS-SP200Syringe Pump · Infusion & Syringe Pump
TypeSingle-channel syringe pump
Flow rate0.1 – 1500 mL/h
Syringe sizes supported5 / 10 / 20 / 30 / 50 / 60 mL
Accuracy±3 % when used per the manual
ProtectionThree-level occlusion pressure, syringe displacement detection
BatteryApproximately 6 hours of continuous use
AS-SP300Dual Syringe · Infusion & Syringe Pump
TypeDual-channel syringe pump
Flow rate0.1 – 1500 mL/h per channel
Syringe sizes supported5 / 10 / 20 / 30 / 50 / 60 mL
Combined modesChannels can run simultaneously or staggered
ProtectionThree-level occlusion pressure, independently per channel
BatteryApproximately 6 hours of continuous use
AS-PC10PCA Pump · Infusion & Syringe Pump
TypePatient-controlled analgesia (PCA) pump
Basal flow rate0.1 – 100 mL/h
Bolus size0.1 – 50 mL, adjustable
Lockout interval1 – 999 minutes
RecordingLog of every demand and the cumulative volume delivered
ProtectionAccess code for configuration, alarm at the limit
Prepared by Aegismed Product DivisionLast updated 16 November 2026
Technical reviewer The manufacturer's Clinical Engineering department — the reviewer's name and sign-off date are stated in the Technical Data Sheet supplied with the quotation
Source references Datasheet and Instructions for Use (IFU) for every model listed above — the full PDF files are available by email
Disclaimer Information on patient suitability (for example use with neonates) and consumable replacement intervals must follow the instructions for use of that model and the judgement of the treating physician; it is not the marketing copy on this page
PART 04

Frequently Asked Questions

Answers are based on the instructions for use and datasheets of the models listed on this page. For anything concerning neonatal patients or consumable replacement intervals, please confirm against the manual supplied with the device and the judgement of the treating physician.

Can it be used with standard IV administration sets?
The AS-IP100 works with standard administration sets, but sets specified for infusion pumps are recommended for accuracy.
Is there an over-infusion protection system?
Yes. A dose limit function is included, and on PCA models the cumulative dose is limited within a set period.
Can it connect to a central station for monitoring?
The AS-SP300 and AS-PC10 support central station connection, so nurses can see the status from a single point.
How long can the battery run?
The internal battery provides 6–8 hours of continuous use, depending on the set flow rate.
Contact us

Request a quote — Infusion Pumps

Tell us the unit quantity, destination country and preferred payment terms. We will reply with a quotation and the document list within one business day.

Emailwanlinfirecontrol@163.com
Phone+86 132 6167 7119
WhatsApp+86 132 6167 7119
Business hoursMon–Sat 09:00–18:00 (GMT+8)